The key steps to DIY vinyl flooring in Toronto

Toronto vinyl flooring is a great choice for beautiful home renovations.

With advancements in today’s technology, classic aesthetics and beautiful designs can be achieved using vinyl flooring with low-costs, easy maintenance and durability. On top of all the benefits that vinyl flooring offers, it is also incredibly simple to install and completely DIY-friendly, which is why it is so popular among homeowners who enjoy projects around the home. Here, we will outline the key steps that you need to know to prepare for your DIY Toronto vinyl flooring. First off, you should understand that to properly install vinyl flooring and have the best results, you should have some experience and skills with home renovations and flooring. It is a very cost-effective procedure since vinyl flooring is relatively inexpensive, however you will want to spend money on a professional to complete the job if you are unfamiliar with flooring.


Now before rushing to the store for some vinyl flooring, first make a sketch of the spaces that you wish to install vinyl in and add in the accurate measurements of all dimensions.

Bring this sketch to the store to figure out the amount of vinyl needed and add on a few extra inches to allow for trimming, cutting and centering the pattern. After purchasing your flooring materials, there will be other tools and things you need to start this project. The type of vinyl you purchase will influence the tools and materials that you will need. For example, luxury vinyl such as SPC flooring comes with a click-and-lock system that may eliminate the need for adhesive vinyl flooring materials. In general, if you are using traditional vinyl, consider the following tools and materials that you will need to get started:
Tools: Putty knife, fine-notched trowel, steel hand roller, utility knife, tape measure and handsaw
Materials: Masking tape, plywood, vinyl flooring, adhesive, patching compound and builder’s craft paper
When you are ready to start, keep in mind that the typical duration of the Toronto vinyl flooring process is approximately two days depending on the size of the space and type of vinyl.

The first step in your flooring process is to ensure that the subfloor is in good condition, flat and smooth.

This means that if there are any holes or uneven grounding, you should fix it with the patching compound and trowel. The next step is to lay out the vinyl flooring and mark the areas that need to be trimmed. Using a utility knife, cut the vinyl flooring material. A tip is to reinforce cut corners of the vinyl with masking tape to prevent tearing as the material is being placed in position.
Then, roll out the flooring in the space to make sure that it fits into position. At this point, there should still be excess vinyl material in areas that fit along the wall. To cut those areas perfectly, we are going to make a template using craft paper and the following strategy. Roll the vinyl flooring next to the wall and expose the subfloor. Then using the craft paper, create a template along the length of the wall. Add pieces of double-sided tape to the craft paper template. Roll the vinyl flooring material back into position and press firmly to adhere the vinyl to the craft paper template. You can now roll back the vinyl and template to make your cuts. The final product is a vinyl flooring material that is trimmed exactly to each wall of your space.
Finally, spread adhesive material along the perimeter of the room and along the walls, if required by the type of vinyl flooring material and attach the vinyl flooring into place. That’s all! Toronto vinyl flooring can be a very simple and straightforward process to do yourself when completing home renovations.


Additional Articles

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7

Compare Products